WIKA CF1H - Manual (Page 38)

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 38 -
(9) Output manipulating value and Step rest time indication mode
In the PV/SV display mode, press the MODE key for approx. 3 seconds.
The display will be changed to main setting mode in the process, however, keep
pressing it until the Output manipulating value is displayed.
If the MODE key is pressed again, the mode reverts to the PV/SV display.
During program control, if the MODE key is pressed in Output manipulating value
indication, the Step rest time indication will be selected.
If the MODE key is pressed again, the mode reverts to the PV/SV display.
PV/SV display mode
Actual Main setting
temperature value
MODE for approx. 3 s
Output manipulating
value indication mode
Actual manipulating
Manipulating value is indicated on the SV display
temperature value by the blinking the decimal point and the MV indicator is lit.
MODE
MODE
(Fixed value (Program control)
control)
Step rest time indication
Actual Step
Step rest time is indicated on the SV display,
temperature rest time and the TIME indicator is lit.
MODE