WIKA CF1H User Manual

Page 14

Operating Instructions Temperature Indicating Controller CF1H

V 1.2

•

01/2007

- 14 -

: Options

+ MODE : Press the MODE key while the key is being pressed.

+ MODE 3s: Press the MODE key for approx. 3 seconds while the key is being pressed.
+ + MODE 3s: Press the MODE key for approx. 3 seconds while the and keys are being

pressed.

+ 3s : Pressing the key, press the key for approx. 3 seconds.

*1: Step rest time is indicated only during program control.
*2: If the Auto-tuning is performed, the mode reverts to the PV/SV display.

If the Auto-tuning is released, the mode will move to “Proportional band setting”.

*3: In the mode Program control change, if

is selected and the MODE key is

pressed, the display reverts to the PV/SV display mode.

+ MODE 3s + + MODE 3s

[Auxiliary function [Auxiliary function

setting mode 1] setting mode 2]

Setting value lock

Scaling high limit

Cooling output high limit

designation

setting

MODE

Main setting value

Scaling low limit

Cooling output low limit

high limit setting

setting

MODE

Main setting value

Decimal point place

Cooling output ON/OFF

low limit setting

selection

action hysteresis setting

MODE

Sensor correcting

PV filter time constant

Alarm 1 (A1) action

value setting

setting Energized/Deenergized

MODE

Overlap/Dead band

Main output high limit

Alarm 2 (A2) action

setting

Energized/Deenergized

MODE

Remote/Local changing

Main output low limit

Alarm 1 (A1) action

setting

hysteresis

selection

MODE

Instrument number

Main output ON/OFF

Alarm 2 (A2) action

setting

action hysteresis setting

hysteresis setting

MODE

Transfer rate selection

Cooling action mode

selection

MODE

Communication protocol
selection

MODE