AMD SimNow Simulator 4.4.4 - Manual (Page 26)

AMD Confidential
User Manual September 12
h
, 2008
14 Chapter 3: Graphical User Interface
disconnect the selected device from all its connections. Please note that this feature is not
supported by the public release version of the simulator.
Table 3-1 lists each component in the “cheetah_1p.bsd” computer. For more information
about devices and possible device configuration, please refer to Section 7, “Device
Configuration” on page 49.
Symbol Device Short Description
AMD Debugger Standard debugging support.
AweSim Processor Simulated Processor.
DIMM Bank DIMM Memory Modules.
AMD 8
th
Generation Integrated
Northbridge
Integrated Northbridge treated as a
separate device in simulation.
AMD-8111™ Southbridge
Southbridge supporting Hard drives,
DVD-/CD-ROM drives, Floppy drives,
USB ports, CMOS, and POST ports.
AMD-8132™ PCI-X
Controller
The AMD-8132 PCI-X Controller is a
HyperTransport tunnel that provides
two PCI-X buses and two IOAPICs.
These PCI-X buses may or may not be
configured
as hot-plug-capable,
depending on the platform.
Emerald Graphics Device Simulated VGA device.
Matrox G400 Graphics Device Simulated VGA/SVGA device.
PCI Bus
Simulated PCI Bus which can connect
multiple PCI devices (such as bridges
and PCI VGA).
Winbond W83627HF SIO
SuperIO Chip with keyboard, mouse
and floppy.
Memory Device
Device that contains a configurable
BIOS ROM image.
SMB Hub Device
The SMB hub device is used to connect
one SMBus to any of four SMBus
branches.
PCA9548 Device
The PCA9548 is an 8-channel System
Management Bus (SMB) switch.
AT24C Device
The AT24C device is a Serial
EEPROM device.