AMD SimNow Simulator 4.4.4 - Manual (Page 123)

AMD Confidential
User Manual September 12
th
, 2008
Chapter 7: Device Configuration 111
.
.
.
APIC initialization information.
An FJMP Instruction. RIP is optional and is only used to double check whether if the
FJMP is taken at the correct instruction. JMP attribute can have the following values:
JMP=0: Force Do-not-take-jump for this instruction
JMP=1: Force Take-jump for this instruction
Defines an IOR or IOW dormant event.
Length="64">
Value="6d00005f5e5bc3909ac04600b7c04600d4c04600eec0460008c1460022c146003cc146
002fc2460067c2460085c24600a3c24600909090909090909090909090" />
Defines a DMAW event.
Defines an INTR PIN event. Level="A" for Asserted or "D" for Deasserted. Name could
be INTR, RESET, A20M, NMI, PAUSE, SMI, and .
DestinationMode="F" DeliveryMode="07" Level="F" TriggerMode="F" Vector="00"
Destination="00" />
Defines an APIC Event. Name could be EOI, INIT, STARTUP, SMI, NMI, INTR,
REMOTE READ, EXTINT, LPARB, and Unknown. Device can be the name of the
device that issues the interrupt. Current XTR implementation ignores the name of the
device.
Defines an INTACK cycle event.
Defines an End of Trace (EOT) event.
Data="0000000053BC7D2C" />
Defines a RDMSR event.
Address="00000000000A88B2" Size="1">