Kramer Electronics VP-747 - Manual (Page 44)

VP-747 - Operating the VP-747 39
8.2 Operating via the Front Panel LCD Display
You can control the VP-747 PREVIEW output from the front panel, high contrast,
LCD Display, using the:
• Front panel OSD buttons: MENU, ENTER, , , , and
• Infrared remote control transmitter (see Figure ) keys: MENU, and the
direction keys
20
For example, to set the time out to 60 seconds via the LCD Display, using the front
panel buttons, do the following:
1. Turn the VP-747 unit ON, and press the OSD ON button (if selected).
2. Press the appropriate front panel OSD buttons (as defined in Figure 19 ).
Figure 19: Example of how to use the LCD Display
8.3 Operating via the Infrared Remote Control Transmitter
You can control the VP-747 remotely, from the infrared remote control transmitter
(that has a range of up to 15 meters and is powered by two AAA size 1.5V DC
batteries).
Menu
Preview Setting
Menu
Program Setting
Menu
Transition
Transition
Effect
Transition
Mode
Left or Right
Changing the speed of the Transition
To set the speed of the transition, press the following:
4. DOWN, two times
2. RIGHT, two times
1. MENU
3. ENTER
5. ENTER
6. Left, or right, to the correct value