Bell & Gossett 10-001-275 XLS Integrated Pump Controller User Manual
Page 23
23
1. Start Pressure: number of seconds the station delays
before the start of the specified combo, once ∆P has
been reached
2. Start Time:
3. Stop Pressure: number of seconds the station delays
before it stops the
specified combo, once ∆P has
been exceeded.
4. Stop Flow:
5. Stop Time:
Tap [Next] to move to the next Field Setup
screen
Pump Curve Configuration
This screen allows you to load/reload the individual pump
curves for the station. Please note that the Booster
station is pre-configured at the factory based on the
selected pumps. Any changes could be detrimental
to station performance.
Figure 5 2 : Pump Configuration Home Screen
7. [System Setup]
Tap [System Setup] from the SERVICE Menu.
NOTE: The screens described below will only
be displayed if they are applicable to the
current system.
Station Information
Enter the job information such as ‘Job
Number’,‘Job Name’, ‘Main PLC IP (usually
192.168.1.10), and ‘Phone Number’. Notice that
the fields ‘HMI Version’ and ‘PLC Version’ have
been grayed out, and are not editable.
Figure 5 3 : Station Information
You have the option of loading or saving current
setpoints to and from an external drive as well by
tapping [File Save/Load].
Figure 5 4 : Configuration File
Type the file name or browse for it using […].
Figure 5 5 : File Browser
The Configuration File screen lets you download
an XML file to the PLC, save an XML file from the
PLC, or delete an existing XML file on the PLC.
The XML configuration files contain the setup
settings for your pumping station.
Caution:
Downloading an incorrect XML file to the PLC
may render the system inoperable. Ensure you