Hawk Industries Hawkjaw Sr. Manual ALS Serial Numbers 1 to 100 - Manual (Page 13)

Raise/Lower Cylinder Hook - Up
Installation
13 Installation
1. Use the Raise/Lower cylinder Cap side
Bolt (B) to connect the HawkJaw
Suspension Ring (SR) to the Raise/
Lower cylinder (C).
2. Use the Raise/Lower cylinder Cap side
Lock Nut (N) to secure the Raise/Lower
cylinder Cap side Bolt (B).
3. Connect the Hanger Swivel (HS) to the
hanging cable.
4. Connect the HawkJaw Rod side (HR)
and Cap side (HC) hydraulic Leader
hoses to the Raise/Lower cylinder Rod
side (RR) and Cap side (RC) hoses. The
HawkJaw Rod side (HR) Leader hose
Quick Disconnect is male.
B
RR
HR
RC
HC
C
HS
NOTE
Make sure the rod side of the Raise/Lower
cylinder (R) connects to the hanging cable.
NOTE
Tightly connect the quick disconnects. A
loose connection causes a pressure drop in
the hydraulic fluid which heats up the fluid
and reduces component life. A loose quick
disconnect may also stop cylinder
movement.
NOTE
Use only Hawk approved quick
disconnects.
Part Numbers
Part Name Part #
Male Quick Disconnect (HC, RR) 061-H26M
Female Quick Disconnect (RC, HR) 061-H26F
SR
N