Avaya Media Gateway G250 - Manual (Page 95)

Ethernet WAN Port Configuration
Issue 5 October 2007 95
Ethernet WAN Port Configuration - General Tab
The General tab of the Ethernet WAN Configuration dialog box enables you to set general
functional parameters for the built-in Ethernet WAN port. These parameters define how the port
interfaces with the network in terms of speed, duplex, and Voice over IP (VoIP) queuing.
Figure 34: Ethernet WAN Port Configuration Dialog Box - General Tab
The following table lists the fields in the Ethernet WAN Port Configuration - General tab and
their descriptions:
Table 35: Ethernet WAN Port Configuration - General Tab
Field Description
Description The user can define a logical name to the port for ease of use.
Port Type The port type; optionally includes reference to the module to which it is
attached and port connector type.
Port Functionality The physical media type of the selected port. If the port conforms to a
certain standard (Repeater, Transceiver, 10BaseT, etc.), this standard
is displayed. If the port does not conform to any standard, Private is
displayed.
1 of 3