Avaya Media Gateway G250 - Manual (Page 229)

Viewing the ARP Table
Issue 5 October 2007 229
The following parameters are displayed:
You can create or delete ARP table entries. For more information on editing tables, refer to
“Editing Tables” on page 210 .
You can limit the table entries displayed. To start the display of entries from a specified interface
and IP address:
1. Click .
Or
Select Action > Start Point. The Start Point dialog box opens.
Figure 102: ARP Table Start Point Dialog Box
2. Enter an IP address in the IP Address field.
3. Select an interface from the If Name listbox.
4. Click OK. The ARP Table displays entries starting with the specified IP address and
interface.
Table 75: ARP Parameters
Field Description
IP Address The IP address of the station.
MAC Address The MAC address of the station.
Layer 2 Interface
name The name of the interface.
Status The status of the interface. Possible status values are:
● Dynamic - The entry is learned from the ARP protocol. If the
station entry is not active for a predetermined time, the entry is
deleted from the table.
● Static - The entry has been configured by the network
management station and is permanent.
● Invalid - The entry in the table is invalid.