Avaya Media Gateway G250 - Manual (Page 120)

WAN Configuration
120 Avaya Integrated Management Release 4.0.1 Software Update Manager
Each row of the Channel Groups table represents a valid Channel Group. The following table
provides a list of the fields in the Channel Groups table and their descriptions:
Creating, Editing, and Deleting Channel Groups
To create a new channel group, click Wizard in the Channel Groups table. The Channel Group
Wizard starts.
To edit a channel group:
1. In the Channel Groups Table, select the channel group you want to edit.
2. Click Wizard. The Channel Group Wizard starts. The screens in the Channel Group Wizard
display the parameters for the selected channel group.
Table 44: Channel Groups Table Parameters
Field Description
Module Number The module on which the Channel Group resides.
Channel-Group The name of the Channel Group.
Bandwidth The bandwidth of the Channel Group.
Encapsulation The Channel Group’s encapsulation. Possible values are:
● PPPSession - The Channel Group uses PPP encapsulation
to establish connectivity.
● FrameRelay - The Channel Group uses Frame Relay to
establish connectivity.
● FrameRelay Non-IETF - The Channel Group uses non-IETF
Frame Relay to establish connectivity.
Status The status of the PPP or Frame Relay interface. Possible values
are:
● Up - The interface is up and can transmit and receive
packets.
● Down - The interface is down due to some failure, and
cannot transmit or receive packets.
● Testing - The interface is in testing mode and cannot
transmit or receive regular data.
● Standby - The interface is a backup interface and cannot
transmit or receive packets unless the primary interface it
backs up fails.
● Disabled - The interface is disabled. It cannot transmit or
receive packets.
● Partially Down - The interface is up. However, some
interfaces (or PVCs) layered on top of this interface are
Down. Some packets can be transmitted and received.