Avaya Media Gateway G250 User Manual
Page 152
WAN Configuration
152 Avaya Integrated Management Release 4.0.1 Software Update Manager
The following table provides a list of the fields in the Dynamic CAC dialog box and their
descriptions.
Table 54: Dynamic CAC Dialog Box
Field Description
Status
The status of Dynamic CAC on the WAN interface. Possible values
are:
●
Active - Dynamic CAC is active on the WAN interface.
●
Not Configured - Dynamic CAC is not configured (but is
supported) for the WAN interface.
●
Not Armed - Dynamic CAC is not armed (but is supported
and configured) for the WAN interface.
●
Armed Not Configured - Dynamic CAC is armed (and
supported, but not configured) for the WAN interface.
●
Not Supported - Dynamic CAC is not supported for the WAN
interface.
Note:
Note:
This field is read-only.
RBBL (kbps)
Remote Bearer Bandwidth Limit. RBBL is the amount of bandwidth
available for CAC on the remote controller.
Note:
Note:
This field is read-only.
Last Update (sec)
The last time the CAC values were updated (in seconds).
Note:
Note:
This field is read-only.
Interface
The local WAN interface supporting Dynamic CAC. Possible values
are:
●
Fast Ethernet
●
Serial
●
Tunnel
CAC BBL (kbps)
The local interface bandwidth threshold after which CAC is
activated.
CAC Priority
The CAC activation priority.
Status
Operational status of Dynamic CAC. Possible values are:
●
Not Configured
●
Active
●
Not Active
●
Active ECMP
●
Not Supported