Avaya Media Gateway G250 - Manual (Page 115)

Viewing Channel Group Information
Issue 5 October 2007 115
To delete a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to delete.
Note:
Note:
You can only delete Frame Relay sub-interfaces on which no IP interfaces are
defined.
2. Click Delete.
3. Click Apply. The Frame Relay sub-interface is deleted.
The following table provides a list of the fields in the Frame Relay sub-interfaces tab of the
Channel Group dialog box and their descriptions.
Table 42: Channel Group Dialog Box - Sub-Interfaces Parameters
Field Description
Name The name of the interface.
Description A user defined description of the Sub-Frame-Relay.
Type The type of Frame Relay sub-interface. Currently, only Point to Point
interfaces are supported.
Bandwidth (kb/s) The bandwidth of the Frame Relay sub-interface in bits per second.
Administrative
Status The administrative status of the interface. Possible statuses include:
● Enable
● Disable
Operational Status The operational status of the Frame Relay sub-interface. Possible
statuses include:
● Up - The interface is up and can transmit and receive packets.
● Down - The interface is down due to some failure, and cannot
transmit or receive packets.
● Testing - The interface is in testing mode and cannot transmit
or receive regular data.
● Standby - The interface is a backup interface and cannot
transmit or receive packets unless the primary interface it
backs up fails.
● Disabled - The interface is disabled. It cannot transmit or
receive packets.
● Partially Down - The interface is up. However, some
interfaces (or PVCs) layered on top of this interface are Down.
Some packets can be transmitted and received.
DLCIs A list of all DLCIs associated with the Sub-Frame-Relay interface.
If more than one DLCI is configured on the Sub-Frame-Relay
interface, priority DLCI is active. The first DLCI is for high priority
traffic, the second DLCI is for medium priority traffic, etc.
1 of 2