Avaya Media Gateway G250 - Manual (Page 101)

Ethernet WAN Port Configuration
Issue 5 October 2007 101
Subnet Mask The subnet mask allocated for the DHCP client. The value of the
mask is an IP address with all of its network bits set to 1 and all of its
host bits set to 0.
Client ID The client identifier used by the DHCP client. This identifier can be up
to 255 bytes.
Default Client ID The default identifier used for manual leased DHCP clients. When
checked, the client will use the default client identifier. The default
client identifier is: 01:Inteface MAC Address.
Host Name The host name used by the DHCP client. The default value is Default
Host Name.
Request Lease
Time (seconds) The finite lease time, in seconds, to be requested by the DHCP client.
The default value is 0.
Enable Request
Lease Time The status of the Request Lease Time option on the device. When
checked, the client requests a finite amount of lease time.
Received Lease
Time (seconds) The lease time, in seconds, received by the DHCP client.
Remain Lease Time
(seconds) The lease time, in seconds, that remains for the DHCP client.
Renew Lease Time
(seconds) The time, in seconds, defined on the DHCP client for renewing a
phase in seconds.
Rebind Lease Time
(seconds) The time, in seconds, defined on the DHCP client for rebinding a
phase.
Default Gateways The default gateways defined for the DHCP client. Up to 8 IP
addresses can be defined as default gateways.
DNS Servers The DNS servers defined for the DHCP clients. Up to 8 IP addresses
can be defined as DNS servers.
Domain Name The domain name designated for the DHCP client. This name can be
up to 255B.
DHCP Server The DHCP server that allocates the specific IP address to the DHCP
client.
Operation Instructs the client to perform Release or Renew operations.
Table 37: Ethernet WAN Port Configuration - DHCP Client Tab (continued)
Field Description
2 of 3