ARRI ARRIFLEX 235 - Manual (Page 98)

98 98
10.4.3 Load/Store Menu
The IVS can store up to 6 sets of settings and recall them. Thus it
is possible to make all settings for e.g. indoor shooting and
store them as setting 1. Shooting continues with some exterior
scenes and the operator will make all settings for this and
store them as setting 2. When the work is continued indoor,
it is very easy recalling all the settings stored as setting 1
and get the same image appearance as before.
One set of settings consists of all set-ups in the IVS. Everything
which can be set electronically, will be stored and recalled.
All video adjustments such as manual gain control, white
balance, flicker free, outputs with or without data and line
interpolation as well as all inserter setups, e.g. user text
insertion off or on, frame lines and so on are stored and
recalled.
The adjustment of the white level of the inserted data, an
inverse display and a fine adjustment of the vertical position
is described in chapters 10.4.5 White Level, Inverse and
Fine Positioning.
Changing them immediately activates all settings.
Check all settings on the connected monitor.
• Enter the Load/Store submenu from the main menu.
MENU LOAD/STORE
-> - LOAD SET 1
- STORE SET 1
(CONFIRM BY
ENTER)
- SET ALL
SETTINGS TO
DEFAULT
- EXIT
Video-Assist-System