ARRI ARRIFLEX 235 - Manual (Page 26)

26 26
5.1 Battery NC 24/7 R
The battery NC 24/7 R has a capacity of 7 ampere-hours.
• Ensure that the main switch on the camera is off.
• Plug the battery cable KC 20S or the spiral battery
cable KC 29S into the power supply socket on the
camera and into the battery-socket.
Note: If the battery voltage is not sufficient, the “bat”
symbol will show in the camera display.
5.2 Charger NCL 24 R
With this charger the battery NC 24/7 R can be charged.
• First check whether the correct mains voltage is set on
the charger.
• Connect the charger to the mains supply.
• Plug the charger cable into the battery socket.
• Press the start button.
Indication of the LEDs
LED Indication
yellow discharging (1A)
red charging
green charger connected to the mains
Power Supply