ARRI ARRIFLEX 235 - Manual (Page 60)

60 60
Frame Rates
The ARRIFLEX 235 offers the possibility to set and store
two frame rates. It is possible to select and store:
• a standard frame rate (23.976, 24, 25, 29.97 and 30 fps),
• and a freely programmed frame rate
in increments of 0.001 fps.
The frame rate is activated via the “NORM PS/CCU”-
buttons ➪ photo on the right of the camera. The
“NORM”-setting corresponds to the standard frame rate,
the “PS/CCU”-position to the freely programmed frame
rate.
Selecting a Standard Frame Rate
(Mode 1)
Standby Operation
• The camera must be in Mode 1 and the camera must
be set to “NORM”.
• Depress the “SEL”-button repeatedly until the desired
frame rate is selected. Within 3 seconds, confirm this
choice by depressing the “SET”-button, otherwise the
initial setting is retained.
PS/CCU button
NORM button
Camera Operation