ARRI ARRIFLEX 235 - Manual (Page 29)

29 29
6. Magazines
In addition to the new 235 magazines, all ARRIFLEX 435,
ARRIFLEX 35 III and 35 II magazines – with the exception
of the shoulder magazine and all 300m/1000ft magazines –
can be used.
Magazine Forward/Reverse operation
ARRIFLEX 235
Shoulder Magazine 60/200 SHM-1 ......................................... only forwards
Shoulder Magazine 120/400 SHM-2 ....................................... only forwards
Steadicam Magazine 120/400 STM-1 ...........................................forw./rev.
ARRIFLEX 435
ARRIMAG 120 ..............................................................................forw./rev.
ARRIMAG 120S ............................................................................forw./rev.
ARRIFLEX 35 III / 35 II
60 m magazine ....................................................................... only forwards
150 m magazine ...........................................................................forw./rev.
Reverse operation with the
ARRIFLEX 35 III/35 II 60m
and the 235 shoulder magazines can lead to
damage of the magazine or the camera!
Do not use any 300m/1000ft magazines as
they could damage the camera.
Do not use magazines that hold more than
120m/400ft loads. The camera automatically
stops after a full load.
Note: All magazines listed on the right are loaded with
the same loop length as on the ARRIFLEX 435
and the ARRIFLEX 35 III.
The loading of ARRIFLEX 35 III and the
ARRIFLEX 435 magazines is described in the
respective instruction manuals.
Magazines