ARRI ARRIFLEX 235 - Manual (Page 44)

44 44
Note: Before the movement block is swung forwards,
make sure that the film is correctly positioned in
relation to the film gate over the entire area,
otherwise the film may be damaged!
• Turn the movement locking lever counter-clockwise as
far as it will go. This will cause the movement block to
swing forwards and to lock into position.
• By turning the inching knob ➪
photo , check that the
film runs smoothly.
• Close the camera door.
Note: Threading the film is also described and
displayed on the inside of the camera door.
positioning pin loop marking
movement locking lever
inching knob
Camera Body