Avaya 1.3 - Manual (Page 243)

DEFINITY ONE Pre-Administration — Setting Up Your Avaya CT Configuration
Issue 1 October 2003 243
Procedure for Setting Up TN799 C-LAN
to DEFINITY ONE (Option 2)
If you are connecting to a DEFINITY via a C-LAN (running the DLG), a PROCR, and Data
Module follow this procedure.
Note:
Note:
Whenever you use the change form of a DEFINITY ONE SAT command,
you must log out for the changes to take effect.
1. Log in to the DEFINITY ONE switch.
2. Type list configuration software-versions
The SOFTWARE VERSIONS screen appears.
3. Check the SOFTWARE VERSION, to ensure that the correct DEFINITY ONE software
version is running on the switch. The following version is appropriate: G3V8c , or later.
4. Type display system-parameters customer-options
The OPTIONAL FEATURES screen appears.
5. Check ASAI Proprietary Adjunct Links? and make sure it is set to y , (page 2
of the OPTIONAL FEATURES screen in the example above). If it is set to n , use the
change system-parameters customer-options command and set the
following feature:
ASAI Proprietary Adjunct Links? y