Avaya 1.3 - Manual (Page 114)

Installing Avaya Computer Telephony TSAPI Client Software
114 Installation Guide
Installing from Diskette
To install a UnixWare client using a diskette, you must first create the installation diskette,
then follow the installation procedure using the files on the diskette. You will need one
formatted high-density diskette.
1. Become super-user (root): su
Enter the root password when prompted.
2. Insert the Telephony Services CD-ROM into your workstation CD-ROM drive.
3. At the command prompt, mount the CD-ROM.
The mount command format is as follows:
mount -F cdfs -r /dev/cdrom/device /mountpoint
where device specifies the CD-ROM drive that contains the Telephony Services
installation disk and mountpoint is the name of an existing directory (such as /
cdrom1 or /CD-ROM_1) on which to mount the CD-ROM. You can use the ls
command to find the appropriate names for your system.
Note:
Note:
Desktop users may find it easier to mount the CD-ROM by double-clicking
on the CD-ROM icon in the "Disks-etc" folder.
4. Change to the UnixWare client software directory.
cd /mountpoint/client/tsapi/unixware
5. Insert an empty formatted diskette into the drive. Copy the package file using the
following command:
cat nwtslib.spl >/dev/fd0
6. Leave the unixware directory.
cd /
7. Unmount the CD-ROM.
The umount command format is as follows:
umount /dev/cdrom/device
where device specifies the CD-ROM drive that contains the Telephony Services
installation disk. You may now remove the CD-ROM.
8. Remove the diskette from the drive. Attach a label to the diskette and write the
following information on it: