Avaya 1.3 - Manual (Page 112)

Installing Avaya Computer Telephony TSAPI Client Software
112 Installation Guide
Installing UnixWare Client Software
The Telephony Services client software for UnixWare can be installed from a command
line, from a CD, or from diskettes.
Installing from Command Line
The Telephony Services software is installed from the command line via the UnixWare
pkgadd command. To do this, you must be logged on as root. Desktop users should open
a "Terminal" window.
Note:
Note:
For a detailed description of the pkgadd command, refer to your UnixWare
documentation.
Installing from the CD
Follow these steps to install the UnixWare client from the CD.
1. Become super-user (root): su
2. Enter the root password when prompted.
3. Insert the Telephony Services CD-ROM into your workstation CD-ROM drive.
4. At the command prompt, mount the CD-ROM.
The mount command format is as follows:
mount -F cdfs -r /dev/cdrom/device /mountpoint
Note: For UnixWare 7.x, use this format
mount -F cdfs -r -onoextend /dev/cdrom/device /mountpoint
where device specifies the CD-ROM drive that contains the Telephony Services
installation disk and mountpoint is the name of an existing directory
(such as /cdrom1 or /CD-ROM_1 ) on which to mount the CD-ROM. You can use the
ls command to find the appropriate names for your system.
Note:
Note:
Desktop users may find it easier to mount the CD-ROM by double-clicking
on the CD-ROM icon in the "Disks-etc" folder.