Avaya 1.3 - Manual (Page 218)

Migrating your Security Database
218 Installation Guide
Converting the Security Database
To convert the Telephony Services Security Database to a Windows NT, Windows 2000 or
Windows XP compatible format, follow these steps:
Back up the NetWare Security Database and create the flat file using one of the following
methods:
Using TSA32:
1. From the "Admin" menu of the TSA32, select "Bulk Admin," then select "Back Up
SDB."
The "Create Flat File From SDB" dialog box prompts you for the name of a flat file
and any comments that are to be placed in the header of the flat file.
2. Click "OK" when you are ready to create the file.
Using NWAdmin:
1. From NWAdmin, double-click on the icon for the Tserver, then select the "Bulk Admin"
page.
2. Select the Bulk Admin option "Back Up SDB (Create Flat File from SDB)." Enter the
name for the flat file, the NDS context of the Security Database, and any comments
that are to be placed in the header of the flat file.
3. Click "OK" when you are ready to create the file.
Note:
Note:
If your Telephony Services users exist in more than one NDS context, you
will have to repeat this procedure for each context.
Table C-1 illustrates an example of the format of the conversion file. (This example
represents only a subset of the file; it does not show all of the information in the file.) This
portion of the file contains a line for each device, worktop, and user record in your SDB.
Table C-1: Security Database Conversion File Example
INFORM1 16 500 501
INFORM2 Tlink Tlink Name TSDI
Size
ADD 16 NOVELL#TSRV_OAM#OAM#EAGLE.SDB.P
WCTI.ACME 1500000
ADD 16 NOVELL#NSRV#NSRV#EAGLE.SDB.PWCTI.
ACME 1500000