Avaya 1.3 User Manual
Page 240
Pre-Release 11 Link Administration Instructions
240 Installation Guide
4. Type
display system-parameters customer-options
The OPTIONAL FEATURES screen appears.
5. Check
ASAI Proprietary Adjunct Links?
and make sure it is set to
y
, (page 2
of the OPTIONAL FEATURES screen in the example above). If it is set to
n
, use the
change system-parameters customer-options
command and set the
following feature:
ASAI Proprietary Adjunct Links? y
6. Type
display system-parameters customer-options
The OPTIONAL FEATURES screen appears.
7. Check
Processor Ethernet?
and make sure it is set to
y
(page 3 of the
OPTIONAL FEATURES screen in the example above).
This setting enables the processor card coresident link. If it is set to
n
, use the
change
system-parameters customer-options
command and set the following
feature:
ASAI Proprietary Adjunct Links? y