Avaya 1.3 - Manual (Page 118)

Installing Avaya Computer Telephony TSAPI Client Software
118 Installation Guide
Editing the Template File -- tslibrc
This information applies to HP-UX, Solaris, and UnixWare clients only.
If you select TCP for the transport type during client installation, Avaya Computer
Telephony creates a template file called /usr/lib/tslibrc.
The tslibrc file contains sample names and addresses and you must change the sample
addressing information to the actual addressing and port information for the server your
clients need to access. Follow these guidelines to edit the tslibrc file.
●
If you are using IP addresses
- In a non-firewall environment, enter the IP address of the NIC for the Telephony
Server (as opposed to the NIC for the G3PD), followed by a space and 450, for
example: 122.222.000 450
- If you are setting up Avaya Computer Telephony in a firewall environment, see
Implementing a Firewall Strategy .
● If you are using a host name
- Enter a valid host name and 450, for example: telserver 450. The host name must
resolve to a routable IP address.