Avaya 1.3 - Manual (Page 227)

DEFINITY ECS and DEFINITY PROLOGIX Administration
Issue 1 October 2003 227
The DLG has a default set of administered parameters that correspond to the defaults
provided in the Avaya CT DEFINITY G3 PBX Driver installation. If you implement private
addressing you will have to change these settings on the G3PBX Driver Configuration
Dialog Box (see
Procedure for Initial, Default Installation of Avaya Computer Telephony
Server Software , in Chapter 3.)
Task 1: DEFINITY ECS and
DEFINITY PROLOGIX — Administering a Link
The objective of Task 1 is administering a link. From the DEFINITY SAT, follow these steps
to complete Task 1.
Note:
Note:
Whenever you use the change form of a DEFINITY SAT command, you
must log out for the changes to take effect.
1. Log in to the DEFINITY switch.
2. Type display system-parameters customer-options
The OPTIONAL FEATURES screen appears.
3. Check ASAI Proprietary Adjunct Links? and make sure it is set to y , (page 2
of the OPTIONAL FEATURES screen in the example above). This setting indicates
that DEFINITY is capable of communicating with an adjunct.