Avaya 1.3 - Manual (Page 185)

Installing the TSAPI SDK
Issue 1 October 2003 185
Installing in the Solaris Environment
1. At the command prompt, enter the pkgadd command as follows:
pkgadd -d /cdrom/cdrom0/SDK/tsapi/sparc/tsapisdk.spl
2. At the enter path to package base directory prompt, enter
/usr/include/nts (or the directory of your choice)
Installing in the HP-UX Environment
3. Become super-user (root): su
4. Enter the root password when prompted.
5. Insert the Telephony Services CD-ROM into your workstation CD-ROM drive.
6. At the command prompt, mount the CD-ROM as follows:
mount -F cdfs -r /dev/cdrom/device /mountpoint
where device specifies the CD-ROM drive that contains the Telephony Services
installation disk and mountpoint is the name of an existing directory (such as /cdrom1
or /CD-ROM_1) on which to mount the CD-ROM. You can use the
ls command to find
the appropriate name for your system.
7. Desktop users may find it easier to mount the CD-ROM by double-clicking on the CD-
ROM icon in the "Disks-etc" folder.
8. At the command prompt, enter the swinstall command as follows:
swinstall -s//SDK/TSAPI/HPUX/TSSDK.TAR\;1