HID iCLASS SE Encoder User Guide - Manual (Page 83)

April 2014 PLT-01067, Version: A.3
Page 5-35 Work Order Manager
5. Key Selection: Set the Application Key options in accordance with the NXP datasheets, and
click Next. All options can be set from the associated drop-down menu.
Note: Selections must abide by the rules you set up for the card.
Field Description
Application Keys
Key Type Displays the Key type.
Crypto Method Triple DES, AES, or 3 Key Triple DES (24 byte keys)
Key Diversifier Algorithm None, NXP AV1 1 Key Triple DES, or NXP AV1 2 Key Triple DES
Auth Key
None, or NXP Default Transport Key.
Note: Only applicable if you selected any options to Overwrite or
Delete existing applications /files.
Change Key
None, or NXP Default Transport Key.
Note: Only applicable if you selected any options to Overwrite or
Delete existing applications /files.
File Keys (Note keys selected in the following must be configured in the Application Keys section
above)
Read Key Select Read Key number (Range 1-13)
Write Key Select Write Key number (Range 1-13)
Read/Write Key Select Read/Write Key number (Range 1-13)