beautypg.com

3 installing the iclass se encoder software, Installing the iclass se encoder software -2 – HID iCLASS SE Encoder User Guide User Manual

Page 28

background image

Setup and Configuration

Page 3-2

PLT-01067, Version: A.3

April 2014

3.3

Installing the iCLASS SE Encoder Software

1.

Plug the iCLASS SE Encoder device into a USB port on a PC.

2. Wait for the correct Windows USB drivers to install, if necessary.
3. Plug the HID USB flash drive into a second USB port on the PC.
4. Locate and launch the iCLASS SE Encoder zip file on the USB flash drive.

5. Unzip the file and double-click on the executable file to launch the installation.
6. On the installation wizard click Next to begin the installation.

See also other documents in the category HID Equipment: