HID iCLASS SE Encoder User Guide - Manual (Page 147)

April 2014 PLT-01067, Version: A.3
Page 7-5 Reader Configuration
4. Enter the Application Properties.
MIFARE 1k / MIFARE 4k Application Properties Window
The following window appears when the MIFARE (1k or 4k) Card Technology has been
selected.
Field Description
Application ID (HEX) Enter an Application ID (3-byte Hex value).
Sector
The Sector number box sets the sector number where the application is
loaded.
Range is: 1k: 0 - 15 4k: 0 - 39
Sectors to Read
Instructs the encoder on the number of consecutive sectors to be read.
Range is: 1k: 0 - 15 4k: 0 - 39
Data Offset
Instructs the encoder on the number of bytes to ignore before applying
subsequent data manipulation operations.
MIFARE Key Type Select from the drop-down menu. Options are: Key A or Key B.
Auth Key
Sets the actual custom key to be loaded to the encoder for authenticating
the read operation.
Note: The keys in this list are created in the Create a Key process. Only keys
created with the Key Size for that technology will appear. For example a key
created with a 6 Byte size would appear for MIFARE.