HID iCLASS SE Encoder User Guide - Manual (Page 150)

Reader Configuration Page 7-8
PLT-01067, Version: A.3 April 2014
8. Click Next.
9. Set the Output Format. Click Next.
Field Description
Output Format
Determines the format. The following options are supported on the encoder:
• Wiegand
If the Data Type is set to Binary Hex/Integer on previous page, the least
significant bits are sent. The maximum Output Length is 32.
When the input data is Raw Data, the maximum Output Length is 255.
• ABA Track II
If the Data Type is set to Binary Integer on previous page, Output
Length represents the number of BCD digits to send. Every digit is sent
as a 5 bit character (4 data bits and 1 parity bit) as defined in ABA Track
II. Output Length is max 10 digits.
When the input data is raw data then Output Length represents the
number of bits to send. No conversion is done. The bits are sent as is.
Output Length is max 255 bits.
• Ascii Dec
If the Data Type is set to Binary Integer on previous page, the least
significant digits are sent. Output Length represents the number of
digits to send. Every digit is send as a character. Output Length is max
10 characters.
When the input data is raw data the data is sent as is. Output Length
represents the number of characters to send. The maximum number of
characters is 32.
Field This field is auto-filled from the previous window.
Card Data Length This field is auto-filled from the previous window.
Output Length Sets the length of the data transmission.