HID iCLASS SE Encoder User Guide - Manual (Page 49)

Chapter
5
April 2014 PLT-01067, Version: A.3
Work Order Manager
5.1 Card Information
The Card Info button on the menu bar, will read the UID and memory configuration of the card
presented to the iCLASS SE Encoder.
1. Place a card on the iCLASS SE Encoder.
2. Select Home tab > Work Order Manager.
3. From the Selected Technology field, select the card type from the drop-down menu.
4. The Card information will display.
Note: Not all cards display the same information. In general the information will be:

CSN - Card Serial Number

Card Type (for example, SO Only)