HID iCLASS SE Encoder User Guide - Manual (Page 156)

Reader Configuration Page 7-14
PLT-01067, Version: A.3 April 2014
7.4 iCLASS Legacy Config Card
This Configuration Plugin sets the Reader Configuration Key used to authenticate Legacy
Configuration cards. This is a means to privatize or localize Encoder configuration authorizations.
1. Select Home tab > Reader Configuration.
2. Select iCLASS Legacy Config Card from the Selected Plugin drop-down menu.
3. Select the keyset from the Card Authentication Key drop-down that matches the encoder
configuration keys currently deployed in the reader.
4. Select the keyset from the Current Reader Authentication Key drop-down that matches the
encoder configuration keys currently deployed in the reader.
5. Select the keyset to be deployed from the New Reader Authentication Keys drop-down.
6. Select the number of Credits in the Credits to Transfer field.
Note: Each Reader configuration transaction is one credit. This is the number of Encoders that
can be configured using this configuration card.
7. Place an iCLASS Legacy Card on the Encoder (see Credential Programmer How to Order
Guide).
8. Click Config Card from the menu bar.
9. A Working status will display.