HID iCLASS SE Encoder User Guide - Manual (Page 61)

April 2014 PLT-01067, Version: A.3
Page 5-13 Work Order Manager
6. Memory Map Selection: Select card configuration and location where the data will be written.
Click Next.
Note: Memory Map will be grayed out with the Data Type set to HID Access Application, as the
HID Access Application is always encoded in the same place. However, if the Data Type is set
to Custom, the Memory Map will be active.
Expected Card Type: Configured
Expected Card Type: Unconfigured
Field Description
Expected Card Type
Configured or Unconfigured. Note: If Unconfigured is selected, the Card
Configuration field below must be set.
Card Configuration
Select the memory configuration from the drop-down list.
Options are: 2K, 16k2, 16k16, 16k2+16k1, 16k16+16k1, 2K (SO Only), 16k2 (SO Only),
16k16 (SO Only), 16k2+16k1 (SO Only), 16k16+16k1 (SO Only)
Default is 2K.