Allied Telesis OmniConnect ISDN - Manual (Page 80)

OmniConnect / ISDN User’s Manual Page 74
Part number 613-10787-00
Cause
Value
Hex
Value
Cause Message Definition
99 0x62 Information
Element Bad
The remote equipment received a message
that includes information elements, which
were not recognized. This is usually due to a
D-channel error. If this error occurs
systematically, the ISDN service provider
should be notified.
100 0x64 Invalid Element
Contents
The remote equipment received a message
that includes invalid information in the
information element. This is usually a D-
Channel error.
101 0x65 Wrong Message
for State
The remote equipment received a message
that includes invalid information in the
information element. This is usually due to a
D-channel error.
102 0x66 Timer Expiry A recovery procedure was initiated by timer
expiration. This is usually a temporary
problem.
111 0x6F Protocol Error An unknown and unspecified D-Channel
error. No other Cause Code applies.
127 0x7F Internetwork
Unspecified
An event occurred, but the network does not
provide causes for the action that it takes. The
precise problem is unknown.