Allied Telesis OmniConnect ISDN - Manual (Page 51)

OmniConnect / ISDN User’s Manual Page 45
Part number 613-10787-00
5.4.17. ISDN Parameter verification
The ISDN Parameter Verification screens are used to verify the configuration of the ISDN
line, ISDN switch settings, the ISP information and the DNS information. Each of these
parameters are checked for the ISDN line. If there is a failure an ‘x’ is displayed next to the
failing item and if the configuration is correct, a check mark is displayed.
ISDN Configuration checks to see if the ISDN line correctly connected to a live ISDN line
and the ISDN switch parameter settings (switch type, Directory Number and SPID) are
correct. If any of these are not true, ISDN Configuration returns a failure. ISP Configuration
checks to see if the ISP information (login, password and phone number) is correct and a
login is possible. If any of these are not correct, this test returns a failure. Lastly, DNS
Configuration checks the DNS server address that is entered in the DNS screen. If this is
incorrect, this test returns a failure.
Normally, this concludes the setup process. Press the EXIT button on the next screen to exit
the setup program. The OmniConnect access device is ready for use!