Allied Telesis OmniConnect ISDN - Manual (Page 68)

OmniConnect / ISDN User’s Manual Page 62
Part number 613-10787-00
7.4. OmniConnect Monitor screens
The OmniStart monitor has a number of screens. In most cases you may follow the on-screen
instructions. However, this section of the manual documents the description of each screen
present in the OmniConnect monitor utility.
7.4.1. OmniConnect Monitor main screen
This is the main screen of the OmniConnect monitor utility. You may get complete status of
the OmniConnect/ISDN access device from this screen. The OmniConnect monitor constantly
updates status information from the OmniConnect/ISDN access device and displays it on this
screen. The default refresh time for this main screen is 1 second. You may change this default
time by selecting the Configure menu item or by pressing the clock button and changing the
main screen refresh duration.
The OmniConnect monitor main screen has three main sections. The first section is the very
top section, which provides information about the OmniConnect/ISDN access device. This
information includes the elapsed time since the OmniConnect/ISDN device has been
operational, the firmware version of the OmniConnect/ISDN, the Ethernet MAC address and
the IP address of the OmniConnect/ISDN.
The middle section of the monitor screen provides Ethernet LAN status information. This
includes the packets sent and packets received counts and the CRC and Frame error counts for
the Ethernet LAN section.