Allied Telesis OmniConnect ISDN - Manual (Page 40)

OmniConnect / ISDN User’s Manual Page 34
Part number 613-10787-00
5.4.3. Multiple router setup
The initial screen displayed
for the OmniConnect/ISDN
setup may be the Multiple
Router Setup screen. If this
screen is displayed it is an
indication that multiple
OmniConnect/ISDN units
have been detected on the
network. Enter the IP address
of the unit that is to be
configured in the IP Address
dialog box. Press Next> to
advance to the next screen.
Press Cancel to exit.
5.4.4. Enter password
The initial screen displayed for the OmniConnect/ISDN configuration is the Enter Password
screen. Access to the OmniConnect configuration utility is protected by a password. The
default password is Omni. Enter Omni into the dialog box titled Password and press Enter or
Next> to advance to the next screen. To change the password from the default value, click the
check box ‘Select this box to change the password’ and then enter the new password in the
New Password and Confirm New Password dialog boxes and press Next>. This will change
t
h
e
p
a
s
s
w
o
r
d
t
o
t
h
e
n
e
w
v