Allied Telesis OmniConnect ISDN - Manual (Page 23)

OmniConnect / ISDN User’s Manual Page 17
Part number 613-10787-00
3.5.4. ISDN provisioning without IOCs
This section provides the information required when an ISDN BRI line is ordered without an
IOC. The BRI switch provisions are summarized by switch type (AT&T and DMS-100) for
each of the options that the switches support. When the ISDN BRI line is being ordered
photocopy the appropriate summary for your BRI switch type and attach it to the worksheet or
order form. This will ensure correct provisioning of the ISDN switch.
An explanation of various parameters listed in the provisioning tables are provided following
the AT&T and DMS-100 provisioning tables.
Table 3 –1: AT&T 5ESS Provisioning
Parameter National ISDN –1 Custom
Multipoint
Custom
Point-to-Point
Directory Numbers (DN) 2 – 8 2 – 8 1
Service Profile Identifiers (SPIDs) 2 2 0
Data Line Class (DSLCLS) STD MP PP
B1 Service (B1SERV) (On Demand) DMD
Note: If voice capability is
not required, replace with
DATA ONLY
(On Demand)
DMD
(On Demand)
DMD
B2 Service (B2 SERV) (On Demand) DMD
Note: If voice capability is
not required on B2, replace
with DATA ONLY
(On Demand)
DMD
(On Demand)
DMD
Circuit Switched Voice Calls (CSV) 2 2 1
CSV Channel (CSVCHL) Any Any Any
CSV Additional Call Offering (CSVACO) Unrestricted - -
CSV Limit 2 - -
Circuit Switched Data (CSD) 2 2 2
CSD Channel (CSDCHL) Any Any Any
CSD Additional Call Offering (CSDACO) No - -
Terminal Type (TERMTYP) A A A
Electronic Key System (EKTS) No - -
Note: A blank cell indicates that this configuration option is not applicable for this line
provision