Allied Telesis OmniConnect ISDN - Manual (Page 53)

OmniConnect / ISDN User’s Manual Page 47
Part number 613-10787-00
are available by pressing the appropriate buttons. Once the advanced setup is complete,
pressing the EXIT button on the Advanced Setup screen exits the OmniStart utility.
6.3. Advanced setup screens
The OmniStart configuration and setup utility has a number of advanced setup screens. The
advanced screen functionality is documented in this section of the OmniConnect/ISDN user’s
manual.
6.3.1. Advanced setup options
Once the user has reached the Advanced Setup Options screen, all the required parameters for
the OmniConnect access device have been configured. The various options located on this
screen may be used to further setup various OmniConnect advanced options.
Use the first button to setup Internet access device, Filter or Network Address Translation
(NAT) features of OmniConnect.
The DHCP Parameters and the LAN IP address and Gateway IP address may be configured
by pressing the second button.
Selecting the Set Miscellaneous Parameters button can configure various Miscellaneous
Parameters for the OmniConnect access device. These Miscellaneous parameters include
resetting the OmniConnect Internet access device, Resetting the default parameters of
OmniConnect and setting the WAN IP addresses of OmniConnect.
Complete the OmniConnect access device setup by pressing the FINISH button. Selecting the
OmniConnect Configuration option icon installed in the OmniConnect Folder can restart the
OmniConnect setup.