Allied Telesis AT-S31 - Manual (Page 61)

AT-S31 Version 1.0.1 User’s Guide
61
Table 4 AT-PB200 Series Switches
Note 1: Maximum distance can only be obtained when the UTP/STP cabling is installed and verified to
TIA/EIA 568A Commercial Building Telecommunications Cabling Standard.
Note 2: Maximum distance for 100 Mbps Optical Datalinks are dependent on the following factors: type of
optical fiber, duplex mode of both end-nodes, and maximum optical loss budget for each of the
optical fiber at the operating optical wavelength.
Model
10/100Base-TX Port 100Base-FX Port
Connector
Maximum
Distance
Connector
Maximum
Distance
AT-PB201 RJ-45 100 m
(328 ft) ST 2 km
(1.2 mi)
AT-PB202 RJ-45 100 m
(328 ft) SC 2 km
(1.2 mi)
AT-PB202/1 RJ-45 100 m
(328 ft) SC 15 km
(9.3 mi)
AT-PB202/2 RJ-45 100 m
(328 ft) SC 40 km
(24.8 mi)
AT-PB202/3 RJ-45 100 m
(328 ft) SC 75 km
(46.5 mi)
AT-PB202/4 RJ-45 100 m
(328 ft) SC 100 km
(62 mi)
AT-PB204 RJ-45 100 m
(328 ft) MT-RJ 2 km
(1.2 mi)
AT-PB205 RJ-45 100 m
(328 ft) VF-45 2 km
(1.2 mi)
AT-PB206 RJ-45 100 m
(328 ft) LC 2 km
(1.2 mi)