Allied Telesis AT-S31 - Manual (Page 54)

Upgrading AT-S31 Software and Configuration Files
54
8VLQJ 7)73 WR
8SJUDGH WKH
6RIWZDUH
If your network is using the TCP/IP protocol, you can use a workstation
and TFTP software to upload new software to the management module
or download a copy of the current software from the management
module. The management module contains the TFTP server portion of
the TFTP protocol which requires that the workstation contain the TFTP
client portion of the protocol.
TFTP software is available from various sources and is included in
SNMPc, which can be purchased through Allied Telesyn. A command
line version is included in most UNIX variants and in Windows NT. Please
consult the documentation or the manufacturer of the software for
instructions on how to use the software.
Regardless of the manufacturer, all TFTP client software will need the
following information:
Host - This is the IP address of the management module to which you
are uploading or downloading software.
Binary - The binary options is used to download the AT-S31 image file.
Get or Put - The Get command is used to download a copy of the
software to a file on the workstation. The Put command is used to
upload a new software image file to the management module.
Source file - When using the Put command to upload software to the
management module, enter the path and filename of the software
image that is to be uploaded. When using the Get command to
download the software from a management module, enter the
Download Password here.
Destination file - When using the Put command to upload software to
the management module, enter the Download Password here. When
using the Get command to download the software from a management
module, enter the path and filename of the software image that is to be
downloaded.