Allied Telesis AT-S31 - Manual (Page 39)

AT-S31 Version 1.0.1 User’s Guide
39
'LVSOD\LQJ WKH 6WDWXV RI D 0RGXOH
The following procedure allows you to view and change the parameter
settings for an individual module.
To display the status of a module, perform the following procedure:
1. From the Main Menu, select Module status and configuration.
The Chassis Status Menu is displayed.
2. Use the arrow keys on the keyboard to highlight a module on which
you want to view the status.
3. Press .
An example of the Module Configuration Menu is shown below.
The Module Configuration Menu items and options are described below:
Port
Lists the type of ports on the module.
Link
Indicates whether there is an active connection between a port and the
device connected to the port. Online indicates that there is a link while
Offline indicates that there is no link.
Speed
This column will specify the operating speed of the port. Possible values
are 10M, 100M, or 1000M.
Module Configuration Menu
Module 1 - AT-PB13
Module: AT-PB13
Type & Version: 01h
Power: On
Port Link Speed Mode RX/ACT
A(10BaseFL) Online 10M Full On
B(10BaseT) Online 10M Full On
Module name AT-PB13
Enable link test (MissingLink is off)
> Disable link test (MissingLink is on)
Return to Chassis Status Menu...