Allied Telesis AT-S31 - Manual (Page 55)

AT-S31 Version 1.0.1 User’s Guide
55
8VLQJ 2PHJD WR 8SJUDGH $GGLWLRQDO 0DQDJHPHQW 0RGXOHV
Once you have upgraded the software on one management module in
the network, you can use the Omega interface to download the new
software onto another management module. The management module
with the upgraded software uses TFTP of the TCP/IP protocol suite to
download the software to the other management module. This
download feature will still work even if you do not use TCP/IP on your
network. A management module can download software to other
management modules of the same product family as long as the
following conditions are met.
❑ If your network does not use TCP/IP, the management modules
must be in the same local segment (collision domain).
❑ If your network uses TCP/IP and the management modules are on
different subnets, the default gateway IP parameter must be
properly configured on all management modules.
❑ All management modules must have the same download
password as the source management module. See the section
Setting the IP Parameters on page 24 for instructions on setting
the download password.
'RZQORDGLQJ
6RIWZDUH WR D
0DQDJHPHQW
0RGXOH
To update software to another management module, perform the
following procedure.
1. Start an Omega session on the management module that contains
the new AT-S31 software.
2. From the Main Menu, select Administration.
The Administration Menu is displayed.
3. Select Update software to another system. The following screen is
displayed.
4. Enter the IP address or MAC address of the management module to
upgrade.
Please specify the system to be downloaded:
The system may be identified by name (‘name’), by IP
address (xxx.x.x.x) or by Ethernet address (000000
000000).
->