Allied Telesis AT-S31 - Manual (Page 18)

Getting Started
18
The -> symbol indicates that you can enter a new value for the
parameter or change the existing value. Once you have entered a value,
press . Parameter changes are immediately activated on a
PowerBlade module.
4XLWWLQJ IURP D
/RFDO 6HVVLRQ
To quit a local Omega session, select Quit from the Main Menu. You
should always be sure to exit from a management session when you are
finished managing a PowerBlade PBC18. This will prevent unauthorized
changes to a chassis’ configuration should you leave you workstation
unattended.
You should also note that the AT-S31 management software only allows
one local or Telnet session at a time. Failure to properly exit from a local
management session might block you from later accessing the chassis
with a Telnet utility.