Allied Telesis AT-S31 - Manual (Page 6)

Preface
6
+RZ 7KLV *XLGH LV 2UJDQL]HG
This guide contains the following chapters and appendices:
Chapter 1, Getting Started , explains how to start a local or Telnet Omega
management session. This chapter also describes the Omega Main
Menu.
Chapter 2, Managing the Chassis , describes how to assign the
management module an IP address, run diagnostics, ping a remote
device, and more.
Chapter 3, Managing the Modules , describes how to display the status of
the modules, configure the ports, perform a link test and reset a module.
Chapter 4, Configuring the Omega Interface , contains the procedures for
configuring the security features of the Omega management interface.
Chapter 5, Upgrading AT-S31 Software and Configuration Files , explains
how to download a new version of the AT-S31 software onto the
management module.
Appendix A, AT-S31 Default Settings , lists the factory default settings for
the management module and software.
Appendix B, Supported PowerBlade Modules , lists the PowerBlade
modules supported by the AT-S31 Version 1.0.1 software.
Appendix C, Technical Support Fax Order , contains a form to fill out to
obtain technical support.