Allied Telesis AT-S31 - Manual (Page 53)

AT-S31 Version 1.0.1 User’s Guide
53
8VLQJ ;0RGHP
WR 8SJUDGH WKH
0DQDJHPHQW
0RGXOH 6RIWZDUH
Omega supports software upgrades to the management module using
XModem. It is assumed that you have the required setup to support this
type of file transfer. This upgrade procedure can only be performed from
a local session because the XModem transfer occurs through the
management module’s RS-232 terminal port.
1. Start a local management session.
2. From the Main Menu, select Administration.
The Administration Menu is displayed.
3. From the Administration Menu, select XModem software update to
this system.
The following screen is displayed.
4. Enter Y to start the download process or N to cancel.
5. Initiate the upgrade from your XModem host. The XModem host
displays a message stating that the upgrade is in progress. Be sure to
wait until the management module has fully downloaded the
software, performed its diagnostic tests, and reinitialized and
rebooted itself before you attempt to reestablish an Omega session.
6. Return to the Main Menu.
Administration Menu
Update software to another system
Broadcast updated software to all systems
XModem software updated to this system
Connect to a remote system
Ping a remote system
Activity monitor
Diagnostics
Reset and restart the system
Return to Main Menu...
Ready to receive software update via XModem.
Warning: During software update Management activity is
disabled.
Do XModem update now? (Yes or No):