Allied Telesis AT-S31 - Manual (Page 48)

Configuring the Omega Interface
48
6HWWLQJ D 7LPHRXW 9DOXH
Specifying a timeout value prevents unauthorized use of the Omega
interface in the event you forget to exit the Omega interface and leave
your management station unattended. By specifying a timeout value,
the program will end the session if there has been no management
activity after the timeout value has expired. The default for the timeout
value is 5 minutes.
To enter a new timeout value, perform the following procedure:
1. From the Main Menu, choose System Configuration.
The System Configuration Menu is displayed.
2. Select Omega Options.
The Omega Options Menu is displayed.
3. Select Timeout and enter a value from 0 (zero) to 32,767 (in minutes).
Entering a value of 0 means there is no timeout. The Omega interface
will not automatically end any session. A session is ended only if you
end the session yourself. If you enter 0, you must always properly quit
after a management session in order not to block subsequent remote
sessions and software downloads to the switch.
4. Press .
The new Omega timeout value is now active.
5. Return to the Main Menu.