Allied Telesis AT-S41 - Manual (Page 38)

AT-S41 User’s Guide
38
Setting the User Interface Configuration
The procedure in this section explains how to set the AT-S41 user
interface security features, including idle timeouts, how to enable and
disable the different management session options, and how to change
the login user name and password.
To set a stack’s user interface configuration, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, select U for User Interface
Configuration.
The User Interface Configuration Menu is displayed in Figure 4.
Figure 6 User Interface Configuration Menu
3. Change the parameters as desired. To change a parameter, type the
bracketed letter in the corresponding command and, when
prompted, enter the new information.
The commands for changing the parameters in the User Interface
Configuration Menu are described below:
Set [C]onsole UI Timeout
This command causes the management software to automatically
end a management session if it does not detect any activity from
AT-8326GB Local Management System
Basic Switch Configuration->User Interface Configuration Menu
Console UI Idle Timeout: 5 Min.
Telnet UI Idle Timeout: 5 Min.
Telnet Server: Enabled
SNMP Agent: Enabled
Web Server: Enabled
User Name: manager
------------------------ -----------------------
Set [C]onsole UI Time Out Enable/Disable Te[l]net Server
Set [T]elnet UI Time Out Enable/Disable [S]NMP Agent
Change Administrator User [N]ame Enable/Disable [W]eb Server
Change Administrator [P]assword [Q]uit to previous menu
Command> _
Enter the character in square brackets to select option