Allied Telesis AT-S41 - Manual (Page 211)

AT-S41 User’s Guide
211
Viewing or Modifying a Port-based VLAN
To view the configuration of a port-based VLAN or to modify a VLAN,
such as to add or remove ports or to change the VLAN name, perform
the following procedure:
1. Click on the Advanced Config menu tab and select VLAN Config from
the sub-menu. Select VLAN Info from the next sub-menu.
The VLAN Information page will appear, as displayed in Figure 73
Figure 73 VLAN Information (Port-based)
This page lists the port-based VLANs in the stack.
2. Click the Modify link in the right column for the VLAN you want to
view or modify.
The Create/Modify VLAN page will appear, as displayed in Figure
74.
Figure 74 Create/Modify VLAN (Port-based VLANs)