Allied Telesis AT-S41 - Manual (Page 124)

AT-S41 User’s Guide
124
Deleting Static MAC Addresses
To delete a static MAC address, perform the following procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type F to select
Forwarding Database.
3. From the Forwarding Database menu, type S to select Static Address
Table.
4. From the Static Address Table Menu, type D to Delete Entry.
The following prompt is displayed:
Enter MAC Address(xx:xx:xx:xx:xx:xx) >
5. Enter the static MAC address in the following format:
xx:xx:xx:xx:xx:xx
Once you have specified the MAC address, the following prompt
is displayed:
Delete entry->Enter VLAN ID>
VLAN ID is in range of 1 to 4094
6. Enter the VLAN ID of the VLAN in which the port for this static address
is a member
Once you have specified the VLAN ID, the management software
deletes the static address from the MAC address table.
7. Repeat steps 4 through 6 to delete additional static MAC addresses.